GN 1/1 Divider
for AluChef® GN 1/1 roasters,
cast aluminum,
black non-stick coating,
with black silicone edges,
divides the food at any point,
clamps automatically,
can be stored and cleaned separately
| Part No. | Length | Width | Height | | | | |
|---|
| 6985/911 | 28.5 cm | 1 cm | 5.5 cm | | | | |
Matching products to your selection
AluChef® GN 1/1 Pan
The advantages of the cast aluminium version over cast iron are clear:
There is a genuine non-stick coating on the inside, which would be impossible to apply to cast iron.
The crockery is much lighter and therefore much easier to use.
The induction capability is much more efficient and targeted.
The pans heat up much faster than cast iron cookware.
Ideal for use in the kitchen or at the buffet. An attractive alternative to the classic chafing dish.
AluChef®,
cast aluminum,
inside with PTFE non-stick coating,
outside enamelled in color,
well stackable,
suitable for induction by two magnetic plates with Ø 20 cm each
| Part No. | Length | Width | Outer Height | Litre | Colour | | |
|---|
| 6985/533 | 53 cm | 32.5 cm | 6.5 cm | 8.5 L | blue | | |
| 6985/535 | 53 cm | 32.5 cm | 6.5 cm | 8.5 L | grey | | |
| 6985/536 | 53 cm | 32.5 cm | 6.5 cm | 8.5 L | green | | |
| 6985/537 | 53 cm | 32.5 cm | 6.5 cm | 8.5 L | black | | |
| (Black finish with outer non-stick coating.) |
|
| 6985/539 | 53 cm | 32.5 cm | 6.5 cm | 8.5 L | red | | |
AluChef® GN 1/1 Glass Lid
AluChef®,
heat-resistant glass,
hole for steam release,
black silicone edge protector and handle,
match on AluChef GN pans
| Part No. | Length | Width | Depth Glass | Overall Height | | | |
|---|
| 6986/530 | 51 cm | 31.5 cm | 3.5 cm | 6 cm | | | |
|
Lid Holder (Set of 2) for Lid 6986 on AluChef GN Pan 6985 |
| 6986/953 | | 3.5 cm | 16 cm | | | | |